Monday, May 29, 2006

Schools Out for the Summer

Its Memorial Day weekend, which is the opening weekend for the pool at CERAland (www.ceraland.org) which is down the street from my house. Its about time.

BMW: The Krylon Touch

Ive been painting the inside of the BMW. This is a total pain in the ass. Its almost done, maybe another 3 cans and it will be done. I picked a metallic blue color that is a few shades off of that of my GTI. Raven drew me a picture of my BMW and did it with blue paint, so I am trying to do what I can to match it. The exterior I will paint myself, and get the full on paint kit, spray gun, etc and do it right. The interior I wasnt that worried about, I just wanted to get it done.




Junk in the Trunk (or just under it

Some time ago I ordered rims and slicks for my mustang. This was in attempt to fix my 2 second 60 foot time I had at the drag strip, as well as for looks. I have always liked the way the American Racing Torq Thrust rim looked, and have wanted to buy a set ever since highschool. Well, I am halfway there. I still need to get the front rims, but since I have the pizza cutter drag tired up front right now, its not a big deal.

The tires I ordered are 26x10.5R15 BFG Comp T/A Drag Radials. They sat a bit higher than what was listed in the catalog, and the rim offset was less than the original rim (which I expected), so I realized that I was going to have more clearance issues than I thought. I could slip my hand between the rim and fender, and that was it. If I were to launch hard, the rear of the car would squat, and the fender would plant directly down in the tire.

My solution was to do a shackle drop. Its pretty much 4 straps of metal (2 for each leaf spring) which bolt to the original shackle locations on the rear of the leaf and have several holes drilled in it for adjustable height. After much, fighting, prying, cussing, and throwing things across the garage (36 year old bolts suck) I was able to get it done. And I had more clearance, so I was off to the races.

Or not. I took my car to the strip, and still had a 2 second 60 foot time. actually, it was worse, and my ET was slower. So I had to figure out what was happening. I noticed when I launched that it didnt feel like I was planting my rearend. I crawled under my car,and I realized my leafsprings were sitting completely flat, and actually resting on the traction baaadrs. I hadnt noticed this before as I had spent so much time with the car up in the air and never got under it on the ground. So, the rearend had nowhere to move, and was incapable of weight transfer.

The easy $150 fix is to just order new leafsprings. This would fix the issue, and get me back out on the track the quickest. However, a leaf spring rearend isnt the most ideal suspension setup for drag racing. Instead, I am going to have to save my money, and go with a set of ladder bars, panhard bar, and coil overs. This will cost about $200 for the ladderbars, $450 for the coilover kit, $100 for the panhard bar, and $60 for the ladder bar crossmemeber, plus installation costs. Unfortunetly, the bill doesnt stop there. If I go with coilovers, I will be putting a set of soft spings on so that I can better transfer weight, which will make the rearend more prone to squatting when both sitting still and especially during hard launches.

This takes me back to the original issue of the tires hitting the fenders. So, I took some measurements, and figured out that I can narrow my rear axle 2.5" on either side, and the tires would fit perfectly inside the wheel wells. Moser Engineering, one of the best known names in rear axles in drag racing, is just north of Indianapolis. On Tuesday I am going to give them a call, and see about having my axle housing narrowed. If I have these rims and tires tucked nicely in my fenders with a fully aftermarket ladderbar suspension, I think I will have a great setup. I have spent TONS of time and money on my engine, and I know it has plenty of power, I just need a better way of getting it to the ground.

NMSU Graduation

A few weeks ago I was back to NMSU for my brother's and Raven's graduation. I guess that the basketball stadium, which is where i had my graduation, was beign remodled, so they had it on the football field. Also, since there is more seating capacity at the football stadium, they decided to have one ceremony instead of two, wich I had. So, the whole the ceremony was long as hell, and extremely hot. Most people, including Raven, walked across the stage, shook hands with some random people no one knows but are important to the school somehow, and then left. Of the roughly 1,300 people that graduated, only about 50 were left on the field by the end of the graduation.

Beyond the ceremony, the trip was nice. I got to hang out and drink with 3 generations of Rotsaerts. They all look the same, and aparently they have something against shoes. Raven's grandfather Jermaine (give me the right spelling when you read this) is very cool. Straight out the old country. It was an awesome experience.

I also got to drink with my brother, and pretty much everyone I knew from Silver City. This is a regular occurance for them, as they have a tight group from the ol days. Its nice to get to see them and catch up from time to time.

Wednesday, May 10, 2006

More Hardware Difficulties


I swung into Lowes after work and picked up some 1/2-13 x 4.5" bolts for my shackles because the 1/2-20 x 5" ones with the kit are too long. Well, the 4/5's didn't have enough thread engagement. So, I need 4.75", which Lowes doesn't carry. Luckily, we have both a Fastenal and a Grainger in town. If only I had realized that they were the wrong size before both stores closed. Instead of doing a nice shackle drop, I am now watching Contact. I always turn it off right before she finds out that the alien has taken the form of her dad. Worst ending ever.

Some things go bad, others go boom

When it rains, it pours. Actually its raining right now, and it supposed to keep raining for the next 10 days. At least I get to escape it for the weekend when I go back to New Mexico for Raven's, Jeff's, and Phil's graduation. But seriously....

My television blew up. About 2 nights ago, I had the vertical strip of color, with the remainder of the screen being black. This has happened before, and usually just needs a good smack on the side to make it go full screen. Not this time. I smacked it, and then the TV started hissing, popping, and of course, smoking like crazy. I unplugged the TV, and let it smolder. So, now I need to buy a new one. That was my bedroom TV, which was a 27 incher I believe, and was given to me by my grandparents, which was with me for the better part of my college career. Rest in peace, Zenith.

If that wasn't enough for the week, I got my BMW block back from the machinist several weeks ago, but didn't bother taking it out of the engine bag for fear of rust (did I mention its raining for 10 days straight?). Well, I got my bearings and piston rings on order, so I figured it was time to prep the block. I looked at the deck surface, and found it to be very rough. So I have since taken back to the machine shop to be decked. I told them to take off as little as possible, because the cylinder head is being decked, and I am running high compression pistons. I bet I end up having to get my pistons flycut to make more clearance for the valves. Damnit.

In Mustang news, I am shackle dropping the rear end to make more clearance for my slicks. The hardware that came with the new shackles are too long, so I need to make a run to the hardware store to pick up some shorter bolts. Thank you Mr. Gasket.

In my mean time I am studying up for my Indiana drivers license as well as the Motorcycle safety test. I don't know how the rest of you find time to keep blogging. . . . Hah, spell check on blogger.com doesnt recognize blogging as a word. fantastic

Sunday, May 07, 2006

German vs Italian


So. as many of you know, I own 4 cars; 2003 VW GTI 20th Anniversary, 2000 Ford F-250 Powerstroke Crewcab 4x4 ( THANKS DAD!!!), 1975 BMW 2002, and a 1970 Ford Mustang fastback. All of these cars have thier purpose, the GTI is the sporty daily driver, the F-250 is my tow vehicle and people/stuff hauler, the Mustang is for drag racing and car shows, and the 2002 is being made into an SCCA road racer. Out of all 3, the GTI is costing me the most money. Between the payments and full coverage, the car costs about 450/month, plus gas, oil changes, weekly washes, tires, etc. I am beginning to think that is money which would be better spent elsewhere. I have began looking at motorcycles to replace it with. The thing is, I dont want a Japanese bike, and American (Harley/Buell) bike is just a $5,000 bike with a $10,0000 nameplate with an image to back. That leaves 3 countries, Germany, Italy, and England. The BMW bikes are a bit more of touring bikes than I want, Triumphs are hit in miss on styling, and the sport bikes have more power than i want for a starter bike, so that just leaves Italy. There are 3 major bike manufacturers in Italy, Moto Guzzi, Ducati, and Aprilia. Moto Guzzi has some fantastic looking bikes, especially the V11 Sport. Unfortunetly, they are expensive, and would negate the cost savings idea. The Aprillia 1000 Mille is again a beautiful bike, but after talking with an Aprillia dealer in Cincinatti this weekend, I found out that they are unreliable about getting thier delears parts. The saleseman mentioned that they have had 8 week leadtimes waiting on parts to get in from Italy, so that rained on that parade. So, ducati. Soooo hot. I am infatuated with the Ducati 620 Monster. It doesnt have the power of say, a 600 CBR, but the naked styling is devine. The dealer in Cincinatti said that they have about a 1 week leadtime on parts from Italy, and appeared to keep most things in stock. The 620 was also his best selling bike, so parts will be more popular for it than the others. A new one is $7,500, and ive seen used ones for about $5,000. If I sell my VW, I could pay off the balance I owe on it, get a bike, and have change to spare. Insurance is about $100/month, so there is a definate savings to be had. The thing most people are going to think is that 1) im going to kill myself and 2) there is a lot of bad weather in Indiana. Well, im not buying the best performance bike, it has 63 horses, and a CBR has about 100+ depending on year, I just want it to get to work and around town. I have 2 race cars to kill myself in. As far as the weather, I dont drive my VW in the bad weather in the first place, I take the Powerstroke. So, if I sell my GTI, ill probably be getting the Monster.

Lawn


I fertilized my lawn this morning. I have the crappiest lawn on the block. This is because of several factors. I dont have a ride on mower, as many of my neighbors do, I dont mow twice a week, Im not retired within nothing better to do, and also the guy who owned my house before me was a car guy, and had better stuff to do. By the time I get around to mowing, its so tall I have difficulty getting it done. So, I fertilized, and my neighbors saw me do it, so its one less reason they have to try to kick me out of the neighborhood.

Chicago









A few weeks back I flew out to Baltimore for work in support of the 2007 on highway diesel launch. Not something that I am directly involved with, but I was in a position to be able to help out. In 2007 there is a new tier of diesel emissions for on-highway vehicles, class 8 and passenger vehicle alike, and that means new tools, new parts, more training, etc. So, I got a free trip out to Baltimore to check out a tool that we sourced, its performance, etc. Nothing to exciting, but it beats sitting in the office. While there I got to catch up with Sam Belt from NMSU, who now works for the patent office, working with turbochargers. Hot.

On the way back, I had a 2 day layover (creative ticket booking and a cool boss) in Chicago, conveniently the same time my parents and brother were there. My brother was excepted to the University of Chicago to get his masters in forensic psychology, and wanted to check out the school first hand, look for apartments, etc. I got there, took a cab to the wrong hotel (there are 2 best westerns on the same street, who knew), walked to the right hotel to meet my parents, and then went out on the town. Downtown Chicago is really sweet, lots to do, everything within walking distance, even the lake. If you need to go anywhere, the public transportation is nice. And seeing as of how parking will cost you $150 to $300+, depending if you want it secured (guard will call the police if he sees someone breaking in) or not (guard calls his buddies and tells them to help themselves to whatever is in/on your car because you were too cheap to pay for his services).

Apartments were expensive, but Jeff was able to get a place right across the street from his school, right downtown. Very nice. I believe its a studio, and its somewhere around $700 a month. Here are some pics.

"convertable" apartment. bedroom with no door. somwhere around $1000/month.
















View out the apartment of the city and the L Train.

















I caught a pic of Jeffs school (above, right) with the bridge up letting a bunch of sailboats pass.

Heres another one. the school is really pretty, the campus is limited to the one building you see there, and not all of it even school, but when you have downtown Chicago all around you, it really doesnt matter. As long as you dont want to go sit in or walk through grass, that is.

We also went to something called The Bean. its in the downtown park and is essentially a giant chromed bean. It looks a bit obscure, but I got some decent pics with it.







awesome pics from the under the bean. See if you can find me.


Car shopping included an Austin Martin DB7. $140,000.

Skyline shot from the John Hancock Building Dan, this foon is for you.